Garage Force publishes no Seattle prices. Its only number is a 2023 blog post saying $4 to $9 a square foot, and its quote comes from a web form before anyone has seen your slab. Seattle quotes for a full flake floor run about $4 to $12. Here is how to read both, and how we price the same floor in person.
Its local franchisees quote each job, and none of the three Seattle-area offices publishes a price. The closest thing to a public number is a corporate blog post from August 2023 that puts polyaspartic floor coatings at $4 to $9 per square foot, nationally.
Treat that as a three-year-old ballpark from a company that hasn't seen your garage. Seattle quotes for a professionally installed flake floor run about $4 to $12 per square foot, and most two-car garages land between $1,600 and $5,800. The spread is prep on your slab: grinding, crack repair, the moisture barrier, cove base, steps.
We don't publish a rate card either, because your slab sets the price. The difference is how you get the number. Garage Force answers a web form within 24 hours. Our crew measures and meters your concrete at the house and prints every line.
One number to keep in your head: the Seattle market band of $4 to $12 a square foot. A quote far below it usually means thinner prep. A quote above it should come with a reason you can see on the slab.



What each company says in public about price and what is included. Where Garage Force's pages are silent, the table says so. Count the silences.
| Price line | Garage Force | Task Force Garage |
|---|---|---|
| Per square foot | $4 to $9, from a 2023 corporate blog post. No Seattle rate anywhere on its site. | Seattle quotes run $4 to $12. Your exact rate comes in writing after we measure and meter the slab. |
| Two-car garage | About $1,440 to $3,240 for 360 square feet, per the same 2023 post. | Most Seattle two-car garages land between $1,600 and $5,800, by prep and package. |
| Grinding and crack repair | "Mechanically prepared", cracks and pits "repaired". No passes and no method on the page. | Included on every floor: diamond grinding in two passes, every crack and joint filled and ground flush. |
| Moisture test | Never mentioned on its Seattle pages. | On every estimate, before the price. |
| Vapor barrier primer | Not on its pages. You find out after the form. | Included on Premium. A priced add-on on Original when the slab needs it. |
| Cove base and steps | Not priced on its pages. Options "vary by location". | Included on Premium, printed at zero on the estimate. |
| Removing an old coating | Ask the local franchisee. | Usually about $1 to $3 per square foot on top, and we say so before the grinder arrives. |
| Anti-slip | An additive you have to ask for. | Grit in every topcoat, at no extra charge. |
| How you get the number | A web form, answered within 24 hours, before anyone has seen your slab. | A free visit of about 20 minutes, itemized in writing before our crew leaves. The number holds on install day. |


Garage Force figures are quoted from its public websites in October 2026 and can change. Its site notes that options vary by location, so the local office may offer items its pages don't list; get them in writing. Task Force Garage is a separate company with no connection to Garage Force.
Four things, whoever is quoting. Know them and two very different numbers start to make sense.
Bigger floors cost more in total and less per foot. The grinder, the crew and the setup cost the same whether your garage is one bay or three. A small garage quoted at a high rate is usually just that math.
Bare concrete grinds quickly. If your floor has an old epoxy kit, paint or a half-peeled coating, that comes off first, and that is where the extra dollar or three per foot goes. Ask whether removal is in your quote.
If your slab meters high, a vapor barrier primer goes down before the color and adds a day. It is the line most low bids leave out, and the one that decides whether your floor is still there in ten years. On our Premium floor it is included.
Original is the full floor: grind, crack repair, polyurea base, flake, polyaspartic topcoat. Premium adds the barrier, cove base up your walls, coated steps, a design session and a one-year inspection, all listed at zero on your estimate.
Put a Garage Force quote next to ours and the totals may differ by a thousand dollars or more. Before you pick the lower one, find the lines that only one of them has.
The barrier is the usual suspect. Then cove base, then steps, then whether crack repair is a line or a phrase. Our estimate prints all of them, with the Premium upgrades at zero. A form reply can't itemize a slab nobody has measured.
Then ask the other quote the same questions. If an item is missing, ask what it would add. A fair comparison is two complete floors, priced the same way.

From the first call to the last line on the estimate.
Our crew comes to the house at a time that suits you. If you would rather start with photos, we can give you a rough number from those first.
Square footage, cracks, old coatings, steps, and a moisture meter on the slab. The reading decides whether the barrier goes in and whether the job is one day or two.
Grinding, crack repair, base coat, flake, topcoat, and the Premium upgrades listed at zero. You keep the estimate and read it without anyone waiting by the door.
The price on the estimate is the price on install day. Nothing new appears once the grinder is running.


Sizes, coating types and the whole Seattle market, in one place: the Seattle garage floor coating cost guide.
Real jobs, real slabs. Every one of these started with a grind and a moisture reading. See the full gallery, or preview a flake color on your own garage.







Its only public number is a 2023 corporate blog post saying polyaspartic floor coatings run $4 to $9 per square foot. Its Seattle-area offices publish no rate, so the real number arrives after a web form, from the franchisee that covers your address, and its options "vary by location". Ask what is in that rate: the moisture test, the barrier, cove base, steps and anti-slip are the lines that matter.
Nobody can tell from its website, because it publishes no Seattle prices. Seattle quotes for a full flake floor run $4 to $12 per square foot, and ours sit inside that band. The honest comparison is two complete floors, priced the same way, with the same prep and the same moisture protection. Our estimate prints every line so you can see what a lower number leaves out.
Most Seattle two-car garages land between $1,600 and $5,800 for a professionally installed flake floor. The low end is a basic system on a clean, dry slab. The high end is a full Premium floor with the barrier, cove base, coated steps and heavier crack work. Garage Force's 2023 post puts a 360-square-foot garage at $1,440 to $3,240 nationally, with nothing said about what that includes.
Its Seattle pages don't mention a moisture test or a vapor barrier primer, even though its own blog calls moisture vapor the number one cause of coating failure. Ask the local office directly and get the answer in writing. With us the test is part of every estimate, the barrier is included on Premium, and on Original it is a priced add-on when the reading calls for it.
A written number for your garage, after a free visit of about 20 minutes. We don't publish a rate card because the slab sets the price: size, what is on it now, the moisture reading and the package. What you can count on is the shape of the estimate: every line itemized, the Premium upgrades at zero, and the price holding on install day.
We price your floor, and we show you why the numbers differ. Bring the quote to the estimate and we go through it with you line by line. You will see what each number includes and what "ask the local office" would add. If ours is higher, you will see exactly which lines make the difference, and you decide whether they are worth it.
Usually because they are two different floors. One includes the vapor barrier primer, cove base, coated steps and real crack repair; the other leaves some of them out or lists them as extras. Add the missing lines to the lower quote and the gap usually closes. Then compare the warranties and who honors them.
In Seattle, usually yes, because the extra is mostly the moisture barrier, and moisture is what ends garage floors here. Premium also carries cove base up the wall, coated steps, a flake design session and a one-year inspection, all listed at zero. If your slab meters dry and you have no steps, Original may be the better buy, and we will say so.
Book a free estimate. Our crew measures, meters the slab and leaves the price in writing, every line on it. Bring the Garage Force quote and we will show you which lines it is missing.