Garage Floor Coating in Nolensville, TN
Just closed on a new Nolensville home? Your garage will never be emptier, so this is the easiest time to coat the floor. We test the slab, grind off the builder's film and lay full flake under a clear topcoat with a lifetime adhesion warranty. Been here for years? You get the same floor and the same free estimate.
- Free estimate at home
- New slabs welcome
- Cars back in 72 hours
- Lifetime adhesion warranty
Your Nolensville garage floor coating
Here's what our garage floor coating in Nolensville, TN includes. We diamond-grind your slab and fill the cracks and joints before the polyurea base coat goes down. Vinyl flake covers it wall to wall, and a clear polyaspartic topcoat with anti-slip grit seals it all in.
We meter-test your concrete before we price anything. A dry slab takes one working day. If yours needs our moisture barrier primer, it takes two, since the primer cures overnight. You walk on it the next day and park on it in 72 hours.
Comparing epoxy flooring in Nolensville? Think of our floor as the upgrade over an epoxy floor. It gets the same grind and flake look, cures in hours, flexes as a young slab settles and won't yellow in the sun. You're parking on it in three days instead of a week.
The estimate is free. At your house, we measure and test your slab, then write your price down item by item. Rather start online? Send us a few photos through our contact form for a quick quote.
Coat it before the moving truck comes
Six in ten Nolensville homes went up in 2010 or later. The fields along Nolensville Road and Rocky Fork Road are still turning into new streets. If yours is one of them, your garage may be sitting empty right now. That's the easiest floor there is to coat.
A young slab is a good start, with no old paint to strip and little wear to fix. It does come with homework from the builder. Skip that homework, and a coating on a brand-new slab can let go within a year.
Still building? Ask your builder what goes on the slab after the pour. Many use a curing compound. That's fine, because our grinders take it off, and knowing ahead helps us plan your day.
What your builder left on the slab
Four things on a brand-new garage floor keep a coating from gripping. Each one has a fix, and all four fixes are part of our prep for your floor.
On top
A curing film
Your builder may have sprayed on a curing compound or a cure-and-seal. A coating can't grip that film, so a floor rolled over it lets go. Our grinders take it off.
The surface
A smooth finish
Power troweling leaves your new floor hard and slick, and a coating needs texture to grip, about like medium sandpaper. Our grinders open it up evenly, from the door to the back wall.
First year
Hairline cracks
New concrete shrinks as it dries, so thin cracks often show up near the cut joints in the first year. Most stop moving. We fill yours and grind them flush, and the flake hides the lines.
Underneath
No plastic below
The code wants plastic under your living space but lists garages as an exception. So even a brand-new garage slab can pull moisture up from the ground. Our meter checks.
A new garage, from pour to move-in
The easiest day to coat a garage is the day it's empty. For your new home, that's the window between closing and the moving truck.
Day 0: the pour
Fresh concrete needs at least four weeks to cure before any coating goes on, ours included. Tell us your pour date if you know it.
Test, then grind
We meter your slab first. The grinders take off the curing film and the slick finish. A high reading means the barrier primer goes on and cures overnight.
Base coat and flake
We fill the hairline cracks and grind them flush. The polyurea base goes down, and we broadcast flake into it until no base shows.
Topcoat, move in
We scrape up the loose flake and roll on the clear topcoat with anti-slip grit. You can carry boxes in the next day and park after 72 hours.
Mill Creek runs right through town
Nolensville grew up along Mill Creek, and the creek still floods. Its gauge north of town set the record in May 2010. In September 2020 a storm pushed it to its second-highest crest, across Concord Road and into homes along Nolensville Road.
If your garage has flooded, or it sits low near the creek or one of its branches, you can still get a great floor. We'll read your slab in several spots and look for white chalky deposits or damp patches.
If the readings call for it, our barrier primer goes down first and your install runs two days. That's settled at the estimate, so the price you're handed already includes it.
Three-car, side-entry and everything between
Nolensville builders offer every size of garage. In Telfair, for example, some plans put a two-car garage on a smaller lot, and others turn three bays to the side. Here's what your layout means for your floor.
- Three-car and side-entry. More floor, but a lower price per square foot, since our setup costs the same. If your third bay becomes a gym or a workbench, the floor handles both.
- Two-car on a smaller lot. Less floor, so setup is a bigger share of your price. Coat the entry steps too, and the whole space looks finished.
- A workshop corner. Dropped tools and spilled wood stain wipe up off a sealed floor, and full flake hides small chips.
- Any size, before move-in. With the garage empty and the cars still at the old house, your job is as simple as it gets.
What garage floor coating costs in Nolensville
These are typical Nashville-area prices for a pro-installed flake floor. Yours comes in writing after the estimate.
- $2K–$4.5Ka typical two-car garage
- $3.5K–$6.5Ka typical three-car garage
A new home gets a break here. Your slab usually skips two big extras, grinding off an old coating and heavy crack repair. What still moves your price is the size, the moisture barrier if the meter calls for it, cove base and coated steps.
See the full breakdown in our Nashville cost guide.
Garage floor coating anywhere in 37135
Your Nolensville address might sit in Williamson, Davidson or Rutherford County, because the ZIP code crosses all three. Wherever yours lands, we'll come to you.
- Established
- Ballenger Farms
- Bent Creek
- Silver Stream Farm
- Summerlyn
- Newer
- Annecy
- Burberry Glen
- Telfair
- Fairington
- Across the line
- Burkitt Place
- Burkitt Village
- McFarlin Pointe
Live just outside it? You're covered too, in Brentwood, Franklin and Antioch.
Seven floors, seven blends
Finished floors in blends you can choose from. See more in the gallery, or try a blend on a photo of your own garage.
Nolensville garage floor questions
How much does a garage floor coating cost in Nolensville, TN?
Around Nashville, a professionally installed flake floor usually runs about $2,000 to $4,500 for a two-car garage. A new slab often skips old-coating removal and heavy crack repair, which helps your number. The moisture barrier, cove base and steps add to it. You'll get your exact price in writing after the free estimate. See prices by garage size.
How soon can a new garage floor be coated?
At least four weeks after the pour, and only once your slab passes a moisture test. New concrete holds a lot of water from the mix and gives it off for weeks. Not sure of your pour date? We'll meter the slab at the estimate and tell you the earliest day that works.
Should I coat my garage floor before I move in?
If the timing works, yes. An empty garage is the easiest floor to coat, with nothing to move and no cars to park on the street. Book it for after closing, once your slab is at least four weeks old. You can carry boxes in the next day and park after 72 hours.
Can you coat over the sealer the builder put down?
Not over it. A curing compound or cure-and-seal is a film a coating can't grip, so a floor rolled on top of it can peel. Our diamond grinders take the film off along with the slick troweled surface, so your base coat grips clean concrete. That grind is part of every floor we do.
Will the hairline cracks in my new slab show through?
Usually not. Thin shrinkage cracks near the saw-cut joints are common in a slab's first year, and most stop moving. We fill them and grind them flush, and full flake hides the patch lines. A crack that keeps moving can show a fine line through any coating, so we'll point those out at your estimate.
Do new garage floors need a moisture barrier?
Some do. The building code doesn't require plastic under a garage slab, and new concrete is still drying, so age alone doesn't settle it. We meter every slab. A high reading, or two or more warning signs, puts the barrier primer in your job, which adds a day while it cures.
Is epoxy or polyurea better for a new garage floor?
For a garage you park in, polyurea. We put down a polyurea base coat and a clear polyaspartic topcoat over full flake. Next to plain epoxy, your floor cures in hours instead of days, flexes as a new slab settles and won't yellow in sunlight. You're parking on it in three days instead of about a week.
Which parts of Nolensville do you cover?
If your address says Nolensville, we cover it, including the 37135 streets on the Davidson and Rutherford sides of the county lines. That takes in Bent Creek, Ballenger Farms, Silver Stream Farm, Annecy, Burberry Glen, Telfair, the Burkitt neighborhoods and McFarlin Pointe. We also cover Brentwood and the rest of the Nashville area.
Get your Nolensville garage floor priced
Book a free visit of about 20 minutes. We'll measure, meter-test your slab and hand you a written, itemized price, with no pressure to sign. Still building? We'll tell you the first day your slab can take a coating.