Garage Floor Coating in Fairview, TN
Red clay mud and old paint are hard on your Fairview garage floor. So is a slab set into the hill. We grind yours to clean concrete and test it for moisture before anything goes down. Then you get full flake under a clear topcoat, backed by a lifetime adhesion warranty.
- Free estimate at home
- Old paint ground off
- Cars back in 72 hours
- Lifetime adhesion warranty
Fairview garage floor coating, start to finish
Fairview's garages come in every age, from 1970s ranches to homes still going up. Our garage floor coating in Fairview starts the same way on all of them. We diamond-grind your slab down to clean, open concrete, and any old paint, sealer or stains come off with it.
Then we fill the cracks and test your slab for moisture. Your floor goes on in layers, starting with a polyurea base, then full flake and a clear polyaspartic topcoat with grit mixed in for footing. Most garages take one working day.
Pricing epoxy flooring in Fairview? What we install is the upgrade on an epoxy floor. You get the same grind and flake look, plus a base that flexes with the slab and a topcoat that won't yellow at the open door. And you're parking on it in 72 hours instead of a week.
Want a firm number before you decide? Book the free estimate. It takes about 20 minutes at your house, and you'll get a written price, item by item. Nobody will push you to sign that day.
The clay under your garage holds water
Fairview sits up on a ridge, and rain runs off it in every direction. Under the topsoil is dense, reddish clay that holds water, and springs seep out of the valley walls except in long dry spells.
If it feels like it rains more out here, you're right. The weather station at Bowie Nature Park records over six inches more rain a year than Nashville's airport.
Your slab sits on that wet clay and pulls moisture up from below. A coating laid over a damp slab can lose its grip, so we test every Fairview slab with a moisture meter before we quote. If yours reads high, the barrier primer goes down first.
Your slab's age decides the prep
Find your neighborhood below. Each era of Fairview building leaves its own marks on a garage floor, and we plan the job around them.
1970s and 1980s
The ranch slab
Live in Glenhaven, Dogwood Hills or another older street? Expect old paint or stains to grind off and wider cracks to fill. There's likely no plastic sheet under your slab, so we test it closely.
1990s and 2000s
The first boom
In Fernvale Heights, Cherokee Hills, Cumberland Estates or Kingwood, your concrete is usually sound. Look for settling cracks, and maybe sealer or paint from an earlier owner. We grind both off.
Now
The new streets
Moving into Bowie Meadows, Richvale or Ottercreek? Give your new slab 28 days to cure. Then we grind off the slick builder finish and take a moisture reading, same as any other.
Garage under the house? Watch for these signs
Some Fairview homes park at basement level, and many garages sit partly in the slope. If yours does, soil presses against a wall and keeps the concrete damper than a garage on flat ground.
Here's how to tell if your slab is moving moisture.
- White, chalky powder that comes back after you sweep.
- Dark, damp-looking patches when nothing was spilled.
- Old paint or coating that's peeling or bubbling.
Spot two of those, or get a high meter reading, and the barrier primer goes into your job. It cures overnight, so your install takes two days.
Got a shop out back?
Lots run bigger in Fairview, with acreage along roads like Cox Pike and Chester Road. That's room for a shop, a pole barn or a three-car garage.
Your shop gets the same floor system as your garage, and the clear topcoat shrugs off oil and dropped tools. Since setup is the same, a bigger floor costs less per square foot. More on shop floors.
What happens on install day
Most garages take one working day. If yours needs the barrier primer, add a day, because it cures overnight.
-
Grind and prime
Our crew re-checks the moisture and grinds your floor twice, edges by hand, taking off old paint and sealer. If your slab needs the barrier primer, it goes on now.
-
Repair and base
We fill the cracks and joints and grind them flush. Then the polyurea base goes down, and we broadcast flake into it until no base coat shows through.
-
Clear topcoat
We scrape and vacuum the loose flake, then roll on the clear polyaspartic topcoat with anti-slip grit mixed in. The garage stays closed overnight.
-
Back in the garage
Walk on it the next morning. Park after 72 hours, and go easy with heavy shelving while the floor hardens over the next week.
What garage floor coating costs in Fairview
Here's what a professional flake floor usually costs for a two- or three-car garage across the Nashville area. Treat these as market ranges, not our rate card.
- $2K–$4.5Kmost two-car garages
- $3.5K–$6.5Ka typical three-car
On an older slab, old paint and heavy crack repair can add to your price. The moisture barrier comes with Premium and is an add-on with Original. You get the exact number in writing after we measure and test. See the cost guide.
Where we coat garages in Fairview
We come to every corner of Fairview, ZIP code 37062. That's the ridge-top subdivisions and the farms down in the hollows. If your street isn't listed, you're still covered.
- Established
- Glenhaven
- Dogwood Hills
- Fernvale Heights
- Cherokee Hills
- Cumberland Estates
- Kingwood
- Newer
- Bowie Meadows
- Richvale
- Ottercreek
- Westview
- Aden Woods
- Wynwood Park
Live closer to town? Down Highway 96 or 100, we also cover Franklin and Bellevue.
The same floor, in other rooms
Like the look? The same flake system works in walkout basements, great rooms, kitchens and porches. See basement floors, patios and porches, or the full gallery.
Fairview garage floor questions
What does garage floor coating cost in Fairview?
Across the Nashville area, most two-car garages run about $2,000 to $4,500 for a professional flake floor, and a three-car costs more. Grinding off old paint, heavy crack repair and the moisture barrier can raise your price. The free estimate gives you a written, itemized number. Read the cost guide.
Can you coat a garage floor that's already painted?
Yes. Old paint is common on older Fairview slabs, and it has to come off, because a new floor is only as strong as what's under it. Our diamond grinder takes it down to bare concrete. A thick coating that's stuck tight takes longer to remove, so we look at yours closely and price that work in at the estimate.
Can a basement-level garage be coated?
Yes. A garage set into a hillside, or under the house, often has soil against one or more walls, so the slab tends to stay damper. We test yours at the estimate. If the meter reads high or the signs are there, the barrier primer goes down first and the job takes two days. Cove base up the walls makes the floor easy to hose off.
Do you coat detached shops and pole barns?
Yes. Your shop slab gets the same grind, crack and joint repair, flake and topcoat as a garage. A big floor costs less per square foot, because setup is the same. Tell us about floor drains or anything bolted to the slab, and we'll plan around it at the estimate. Shop floors in more detail.
Will clay mud stain a coated garage floor?
No. The yellow-to-red clay under Fairview rides in on your tires, especially near new construction. It soaks into bare concrete and leaves a stain. On a coated floor it sits on top of the clear topcoat, so a hose or a damp mop takes it off. The anti-slip grit in the topcoat keeps you steady while the floor is wet.
Is epoxy flooring a good fit for a Fairview garage?
Epoxy does best in a dry, heated room. Your Fairview garage sees plenty of freezing nights and often sits on damp ground, and epoxy yellows in sunlight and needs about a week before you park. What we install is the upgrade on epoxy. You get the same prep and flake look, a flexible polyurea base, a topcoat that stays clear, and your car back in three days.
How long does the install take?
One working day for most garages on a dry slab. It takes two days when the moisture barrier primer goes down, because it cures overnight, and every Premium floor includes it. You can walk on the floor the next morning and park after 72 hours. It keeps hardening for another week or so.
Which parts of Fairview do you cover?
All of Fairview, in ZIP code 37062. That includes older neighborhoods like Glenhaven, Dogwood Hills, Fernvale Heights and Cherokee Hills, newer ones like Bowie Meadows, Richvale and Ottercreek, and the farms and acreage around them. We also cover Franklin, Bellevue and the rest of the Nashville area.
Find out what your slab needs
Book your free estimate. We measure, run the moisture test, look at the cracks and any old coating, and leave you a written price, item by item. There's no pressure to sign.